Sesebelisoa sa motlakase sa SMD
Ka sephutheloana sa tape&reel, ho bolokehile haholo ho sireletsa sehlahisoa.
Moetso ona o sa sireletsehang oa li-inductors tsa matla a holimo o fana ka ts'ebetso e netefalitsoeng ka boleng bo boholo. fana ka lintlha tse phahameng tsa saturation hajoale, polokelo e phahameng ea matla, le ho hanyetsa ho tlase.
Thepa ea mochini e ntlafalitsoeng ka bo eona mme e entsoe ke Mingda.
Re sebelisa thepa ea makenete ea mofuta oa lehae le likhoele tsa koporo tse tsoang kantle ho naha.
Lits'ebetso tse 16, tlhahlobo ea boleng ka sekhahla
Ka kakaretso, ho kenngoa ha li-inductors tsa maqeba a terata lipotolohong tsa elektronike ke coil-core coil, kapa coil e nang le matla a khoheli, e ka fetisang motlakase o monyenyane feela le ho mamella mocheso o tlaase; le li-inductors tsa matla li boetse li na le li-coil-core coil le magnetic cores, haholo-holo Tšobotsi ke hore e na le lithapo tse teteaneng, tse khonang ho mamella li-amps tse mashome, makholo, likete, kapa esita le mashome a likete a li-amps. Ho na le mefuta e 'meli ea li-inductors tsa matla: tse nang le sekoaelo sa makenete le tse se nang sekoaelo sa makenete, haholo-holo tse entsoeng ka khoele ea khoheli le khoele ea koporo. Haholo-holo e bapala karolo ea ho sefa le ho sisinyeha potolohong
Ming Da fana ka boholo kamoo u batlang, boleng ka hohle kamoo u ka bo sebelisang, theko kamoo u ka khonang!Lihlahisoa tse phahameng tsa ts'ebetso ea theko e phahameng.
Melemo:
1. Tšebeliso ea sephutheloana sa "Carrier tape" bakeng sa SMT
2. High rated current, Low DCR.
3. E loketse bakeng sa reflow SMT Craft soldering.
4. Haha ho latela melao ea RoHS 'me u etelle pele mahala
5. High saturation konokono lintho tse bonahalang le tse nyenyane boholo
6. Konokono ea ferrite ea tahlehelo e tlaase
7. Boemo bo tloaelehileng ba indasteri
8. Boholo ba 1068/3316/3340/5022 bo fumaneha bakeng sa hau.
Re sebelisa theipi ea carriers le reel, e loketseng matla a sefahleho a SMT le ho solderability hantle. Ka sebopeho sena se sireletsang, boleng bo phahameng ba Q. Ho lutla ha makenete e tlase, khanyetso e phahameng ea hajoale, khanyetso e tlase ea DC.
Boholo le boholo:
Ntho | A | B | C | D | E | F |
Boholo(mm) | 12.7±0.2 | 10±0.2 | 4.9±0.3 | 7.6±0.3 | 2.4±0.2 | 2.5±0.2 |
Lintho tsa motlakase:
Specification Tolerance | Boemo ba Teko | Seletsa sa ho lekanya | |
Inductance L | 1000uH±20% | 100KHz/0.1V | TH2816B |
DCR | 1.45ΩMAX | 25°C | VR131 |
Isat ( <20% e theoha) | 0.085 | lOKHz/O.lV | TH2816B&VR7210 |
Isat ( <30% theoha) | 0.14 | lOKHz/O.lV | TH2816B&VR7210 |
SRF | 2.5MHZ±20% | ||
Li-irins | 0.25A | △T<40° |
Lisebelisoa:
Khatello ea 1.Noise, EMI Filter, DC-DC converter
2.E loketse hantle bakeng sa ho fetola balaoli
3.Car Electronics/LED/Notebook/ Thepa ea lapeng